Psych Wall 3D model – Work in progress
In the viewer above, wait for it to fully load for the best experience. Then click the model viewer button to turn different parts of it on and off.
Click the model viewer button: 
Then navigate the viewer and click the circled button to hide sections of the model.
We started by framing the wall out on the floor. Even though we had an initial plan for the dimensions, laying everything out in the space allowed us to get a better view of what it would look like in place. We chose to go with 10ft walls and the full 20ft of length, which differed from the original design.
Once that was done an we had all the dimensions right we were able to stand up the first wall.
Here is the first wall frame in place, followed by the second shorter wall
The wall is in place here, but still has a decent amount of work left. we haven’t yet completed the tie-in between the walls, and haven’t received the sloped pieces we ordered to do the curved sections on the floor and corner. We did have good luck mounting the walls to the OSB on the floor though and it seems very stable, the weight of the wall holds everything in place nicely in addition the OSB gives us a good surface to attach the covering material when we get to that.